 |
|
Home - Resources
- Nissan Recalls
- 2007
- Ct
2007 Nissan Ct Recall Lookup
Many vehicles have Nissan "factory-authorized" recalls where repairs can be completed at no charge
to the customer. Check to see if your vehicle has any outstanding recalls, and schedule a
service appointment to see if you qualify for a FREE repair.
If you would like to check on any Recall Notices for your vehicle, please enter the appropriate
year and model.
2007 Mack Ct Recalls
|
|
|
|
NHTSA CAMPAIGN ID Number: 07V497000
Component: TRAILER HITCHES:FIFTH WHEEL ASSEMBLY
Manufacturer: MACK TRUCKS, INC
Potential Number of Units Affected: 950
Year: 2007
Make: Mack
Model: Ct
Manufactured
from: 2006-01-09
to: 2007-06-29
Recall Date: 2007-10-23
Summary:
ON CERTAIN TRUCKS EQUIPPED WITH A SAF HOLLAND SIMPLEX FIFTH WHEEL, THE LEVER ARM PIVOT BOLT MAY HAVE BEEN OVER TIGHTENED. AN OVER TIGHTENED PIVOT BOLT CAN DISTORT THE PIVOT BOLT SPACER SLEEVE, WHICH MAY PREVENT THE FIFTH WHEEL LATCH JAW FROM CLOSING AND LATCHING SECURELY AROUND THE TRAILER KING PIN.
THERE IS A POSSIBILITY THAT THE PIVOT BOLT CAN BECOME LOOSE WITHOUT THE DRIVER'S KNOWLEDGE. WHEN THIS OCCURS, THE DRIVER COULD DRIVE AWAY AND THE TRAILER COULD BECOME DISENGAGED, INCREASING THE RISK OF A CRASH.
DEALERS WILL REPLACE THE PIVOT BOLT AND SLEEVE WITH A HEX HEAD SHOULDER BOLT AND WASHER FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 28, 2008. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 07V051000
Component: SERVICE BRAKES, AIR
Manufacturer: MACK TRUCKS, INC
Potential Number of Units Affected: 37
Year: 2007
Make: Mack
Model: Ct
Manufactured
from: 2005-01-03
to: 2006-12-15
Recall Date: 2007-02-15
Summary:
CERTAIN TRUCKS EQUIPPED WITH HAULMAX REAR SUSPENSIONS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS." IT DOES NOT MEET THE REQUIRED STOPPING DISTANCE AS SPECIFIED IN THE REGULATION.
THE VEHICLE COULD EXPERIENCE REDUCED BRAKING PERFORMANCE AS A RESULT. IF THIS WARNING IS NOT HEEDED, A VEHICLE CRASH COULD OCCUR.
DEALERS WILL RELOCATE THE ANTILOCK BRAKING SYSTEM (ABS) SENSOR FROM THE REAR DRIVE AXLE TO THE FRONT DRIVE AXLE FREE OF CHARGE. THE RECALL BEGAN ON JUNE 15, 2007. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 07V053000
Component: SUSPENSION
Manufacturer: MACK TRUCKS, INC
Potential Number of Units Affected: 86
Year: 2007
Make: Mack
Model: Ct
Manufactured
from: 2006-09-09
to: 2006-11-20
Recall Date: 2007-02-15
Summary:
ON CERTAIN TRUCKS EQUIPPED WITH A 46K POUND CHALMERS REAR SUSPENSION, THE ADJUSTABLE TORQUE RODS USED ON THE SUSPENSION MAY BE BRITTLE.
THIS MAY LEAD TO A PREMATURE FAILURE OF THE ROD, WHICH MAY RESULT IN A LOSS OF CONTROL OF THE VEHICLE INCREASING THE RISK OF A CRASH.
DEALERS WILL INSPECT AND REPAIR THE RODS AS REQUIRED FREE OF CHARGE. THE RECALL BEGAN ON MARCH 14, 2007. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 06V323000
Component: SERVICE BRAKES, AIR
Manufacturer: MACK TRUCKS, INC
Potential Number of Units Affected: 3
Year: 2007
Make: Mack
Model: Ct
Manufactured
from: 2006-02-01
to: 2006-06-01
Recall Date: 2006-08-31
Summary:
CERTAIN TRUCKS EQUIPPED WITH THE TRI-DRIVE OPTION FAIL TO COMPLY WITH THE PERFORMANCE CRITERIA REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, 'AIR BRAKE SYSTEMS.'
THE PURPOSE OF THIS STANDARD IS TO INSURE SAFE BRAKING PERFORMANCE UNDER NORMAL AND EMERGENCY CONDITIONS.
THE TRUCKS WILL HAVE THE PNEUMATIC SYSTEM RECONFIGURED. THE RECALL IS EXPECTED TO BEGIN ON OR BEFORE SEPTEMBER 29, 2006. OWNERS MAY CONTACT MACK AT 1-800-528-6586.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 06V271000
Component: SERVICE BRAKES, AIR
Manufacturer: MACK TRUCKS, INC
Potential Number of Units Affected: 7447
Year: 2007
Make: Mack
Model: Ct
Manufactured
from: 2006-02-01
to: 2006-05-15
Recall Date: 2006-07-26
Summary:
ON CERTAIN TRUCKS EQUIPPED WITH A LEGRIS AIR MANIFOLD, THE BRASS PUSH-TO-CONNECT CARTRIDGE MAY UNEXPECTEDLY SEPARATE FROM THE PLASTIC HOUSING.
IF THE PUSH-TO-CONNECT CARTRIDGE THAT SUPPLIES THE AIR TO THE PARK BRAKE CHAMBERS WERE TO SEPARATE, THEN THE BRAKES COULD UNEXPECTEDLY APPLY INCREASING THE RISK OF A CRASH.
DEALERS WILL REPLACE THE AIR MANIFOLD FREE OF CHARGE. THE RECALL BEGAN ON SEPTEMBER 27, 2006. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 06V232000
Component: PARKING BRAKE:CONVENTIONAL:AIR
Manufacturer: MACK TRUCKS, INC
Potential Number of Units Affected: 2587
Year: 2007
Make: Mack
Model: Ct
Manufactured
from: 2006-04-05
to: 2006-06-01
Recall Date: 2006-06-28
Summary:
ON CERTAIN TRUCKS EQUIPPED WITH SR-7 BENDIX BRAKE VALVES, THE CHECK VALVE INSIDE THE VALVE CAVITY MAY NOT PROPERLY SET, CAUSING INTERNAL AIR LEAKAGE. IF THE CHECK VALVE DOES NOT PROPERLY SEAT, THE RESULTING LEAKAGE CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER OPERATOR PULLS THE DASH VALVE BUTTON.
THE DELAYED PARKING BRAKE APPLICATION CAN OCCUR WITHOUT WARNING, LEADING TO UNINTENDED VEHICLE ROLLAWAY INCREASING THE RISK OF A CRASH.
DEALERS WILL INSPECT THE VALVES AND REPLACE IT FREE OF CHARGE. THE RECALL BEGAN ON AUGUST 14, 2006. OWNERS MAY CONTACT MACK TRUCKS AT 1-800-528-6586.
|
This website is independently owned by One Common Drive, LLC. and is not affiliated, endorsed, or sponsored by Nissan North America, Inc. or Nissan Extended Services North America.
|
|
|
