 |
|
Home - Resources
- Nissan Recalls
- 1996
- Breeze
1996 Nissan Breeze Recall Lookup
Many vehicles have Nissan "factory-authorized" recalls where repairs can be completed at no charge
to the customer. Check to see if your vehicle has any outstanding recalls, and schedule a
service appointment to see if you qualify for a FREE repair.
If you would like to check on any Recall Notices for your vehicle, please enter the appropriate
year and model.
1996 Plymouth Breeze Recalls
|
|
|
|
NHTSA CAMPAIGN ID Number: 10E059000
Component: SUSPENSION:FRONT:CONTROL ARM:LOWER ARM
Manufacturer: CHRYSLER GROUP LLC
Potential Number of Units Affected: 22689
Year: 1996
Make: Plymouth
Model: Breeze
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2010-12-27
For more information in regard to the factory and extended warranty options for the Breeze, please review the Plymouth Extended Warranty Information.
Summary:
FEDERAL-MOGUL IS RECALLING CERTAIN REPLACEMENT CONTROL ARM ASSEMBLIES, PART NUMBERS K7425, 10945, FA4510X, K7427, 10946, AND FA4611X, SOLD FOR USE ON VARIOUS PASSENGER VEHICLES LISTED ABOVE. THE BALL JOINT ON THE CONTROL ARM ASSEMBLY CAN FAIL CAUSING THE BALL STUD TO WEAR THROUGH THE CONTROL ARM HOUSING RESULTING IN NOISE AND/OR SEPARATION OF THE BALL STUD FROM THE HOUSING.
IF THERE IS A SEPARATION OF THE BALL STUD FROM THE HOUSING, THE DRIVER CAN LOOSE STEERING CONTROL, POSSIBLY RESULTING IN A VEHICLE CRASH.
FEDERAL-MOGUL WILL NOTIFY OWNERS OF RECORD AND REPLACE THE AFFECTED CONTROL ARMS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JANUARY 28, 2011. OWNERS MAY CONTACT FEDERAL-MOGUL AT 1-877-489-6659.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 09E056000
Component: SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
Manufacturer: CHRYSLER GROUP LLC
Potential Number of Units Affected: 5787
Year: 1996
Make: Plymouth
Model: Breeze
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2009-10-09
For more information in regard to the factory and extended warranty options for the Breeze, please review the Plymouth Extended Warranty Information.
Summary:
QUALIS AUTOMOTIVE IS RECALLING CERTAIN AFTERMARKET BALL JOINTS SOLD FOR USE ON CERTAIN PASSENGER VEHICLES. THE SOCKET MAY HAVE BEEN EXCESSIVELY HARDENED WHICH COULD CAUSE IT TO CRACK NEAR THE RETAINING RING GROOVE ALLOWING THE BALL STUD TO SEPARATE UNDER IMPACT LOAD. THE SUBJECT BALL JOINTS WERE SOLD AS FOUR PART NUMBERS, D10945, D10946, G10945, AND G10946. THE AFFECTED CONTROL ARMS, D10945 AND D10946, ARE STAMPED WITH THE FOLLOWING DATES ON THE BALL JOINTS: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, AND 116609. THE G10945 AND G10946 ARE THE SAME PART AS THE D10945 AND D10946 RESPECTIVELY. THEY ARE LABELED DIFFERENTLY DEPENDING ON THE AFTERMARKET CUSTOMER.
SEPARATION OF THE BALL STUD FROM THE SOCKET OF THE BALL JOINT HOUSING WOULD ALLOW THE CONTROL ARM TO COLLAPSE AND THE WHEEL TO FOLD IN CAUSING LOSS OF STEERING CONTROL, POSSIBLY RESULTING IN A CRASH.
QUALIS AUTOMOTIVE WILL REPLACE THE BALL JOINTS FREE OF CHARGE. THE SAFETY RECALL BEGAN ON NOVEMBER 9, 2009. OWNERS MAY CONTACT QUALIS AUTOMOTIVE AT 1-800-493-4128.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 06E091000
Component: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Manufacturer: CHRYSLER GROUP LLC
Potential Number of Units Affected: 24358
Year: 1996
Make: Plymouth
Model: Breeze
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2006-11-02
For more information in regard to the factory and extended warranty options for the Breeze, please review the Plymouth Extended Warranty Information.
Summary:
CERTAIN AIRTEX FUEL PUMP MODULES, P/NOS. E7089M, E7094M, E7113M, AND E7129M, MANUFACTURED BETWEEN JUNE 1 AND SEPTEMBER 24, 2006. THESE FUEL PUMP MODULES WERE SOLD AS AFTERMARKET FOR USE IN CERTAIN DAIMLERCHRYSLER VEHICLES LISTED ABOVE. SILICONE MATERIAL USED IN MANUFACTURE OF THE FLAPPER VALVE WAS OUT-OF-SPECIFICATION, LEADING TO EXCESS SWELL OF THE FLAPPER VALVE RESTRICTING THE FLOW OF FUEL TO THE FUEL PUMP MODULE.
FUEL RESTRICTION COULD RESULT IN LOSS OF POWER AND/OR ENGINE STALL, POSSIBLY RESULTING IN A VEHICLE CRASH.
AIRTEX WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMP MODULES FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT AIRTEX TOLL-FREE AT 1-866-867-3759.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 06E088000
Component: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
Manufacturer: CHRYSLER GROUP LLC
Potential Number of Units Affected: 39243
Year: 1996
Make: Plymouth
Model: Breeze
Manufactured
from: 0000-00-00
to: 0000-00-00
Recall Date: 2006-10-23
For more information in regard to the factory and extended warranty options for the Breeze, please review the Plymouth Extended Warranty Information.
Summary:
CERTAIN TIGAS FUEL PUMP MODULES MANUFACTURED BETWEEN JUNE 1 AND SEPTEMBER 24, 2006, SOLD UNDER VARIOUS BRAND NAMES AND P/NOS. THESE FUEL PUMP MODULES ARE SOLD AS AFTERMARKET FOR USE IN CERTAIN DAIMLERCHRYSLER VEHICLES LISTED ABOVE. SILICONE MATERIAL USED IN MANUFACTURE OF THE FLAPPER VALVE WAS OUT-OF-SPECIFICATION, LEADING TO EXCESS SWELL OF THE FLAPPER VALVE RESTRICTING THE FLOW OF FUEL TO THE FUEL PUMP MODULE.
FUEL RESTRICTION COULD RESULT IN LOSS OF POWER AND/OR ENGINE STALL, POSSIBLY RESULTING IN A VEHICLE CRASH.
TI AUTOMOTIVE WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMP MODULES FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 6, 2006. OWNERS MAY CONTACT TI AUTOMOTIVE TOLL-FREE AT 1-877-461-1834.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 04V021000
Component: POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:FLOOR SHIFT
Manufacturer: CHRYSLER GROUP LLC
Potential Number of Units Affected: 2315768
Year: 1996
Make: Plymouth
Model: Breeze
Manufactured
from: 1992-04-01
to: 1999-07-31
Recall Date: 2004-01-13
For more information in regard to the factory and extended warranty options for the Breeze, please review the Plymouth Extended Warranty Information.
Summary:
ON CERTAIN PASSENGER VEHICLES, THE FLOOR SHIFTER IGNITION-PARK INTERLOCK MAY FAIL AND ALLOW THE SHIFTER TO BE MOVED OUT OF THE PARK POSITION WITH THE KEY REMOVED. AN INOPERATIVE INTERLOCK MAY ALSO ALLOW THE KEY TO BE REMOVED WHEN THE SHIFTER HAS NOT BEEN PLACED IN THE PARK POSITION.
EITHER CIRCUMSTANCE MAY RESULT IN THE VEHICLE ROLLING AWAY WITHOUT WARNING.
DEALERS WILL INSTALL A NEW LOAD-LIMITING PUSH ROD INTO THE FLOOR SHIFTER LEVER OF THE AFFECTED VEHICLES. OWNER NOTIFICATION BEGAN ON JUNE 14, 2004. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 98V183000
Component: POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START SWITCH
Manufacturer: CHRYSLER GROUP LLC
Potential Number of Units Affected: 685000
Year: 1996
Make: Plymouth
Model: Breeze
Manufactured
from: 1994-07-25
to: 1998-01-21
Recall Date: 1998-08-06
For more information in regard to the factory and extended warranty options for the Breeze, please review the Plymouth Extended Warranty Information.
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS. THE ADJUSTMENT OF THE CABLE CONNECTING THE CONSOLE SHIFTER MECHANISM TO THE IGNITION KEY CAN CAUSE A TRAPPED KEY CONDITION WHICH CAN RESULT IN A LOW FORCE REQUIRED TO DEPRESS THE SHIFT BUTTON. A COMBINATION OF APPLYING A MIS-ADJUSTED RELEASE BUTTON WITH A LOW FORCE ATTEMPT TO SHIFT OUT OF PARK WITH THE KEY IN THE LOCKED POSITION, CAN BREAK THE CONNECTING PIN IN THE SHIFTER.
IF THIS HAPPENS, THE "IGNITION-PARK" INTERLOCK SYSTEM WILL BE NONFUNCTIONAL.
DEALERS WILL INSPECT FOR PROPER OPERATION OF THE SYSTEM. ANY VEHICLES THAT ARE NOT FUNCTIONAL AFTER THE INSPECTION WILL HAVE THE SHIFT MECHANISM AND CABLE REPLACED WITH A "SELF-ADJUSTING" DESIGN.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 97V201000
Component: SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT
Manufacturer: CHRYSLER GROUP LLC
Potential Number of Units Affected: 599000
Year: 1996
Make: Plymouth
Model: Breeze
Manufactured
from: 1994-07-31
to: 1997-07-10
Recall Date: 1997-11-13
For more information in regard to the factory and extended warranty options for the Breeze, please review the Plymouth Extended Warranty Information.
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE LOWER CONTROL ARM BALL JOINT CAN SEPARATE DUE TO LOSS OF LUBRICATION.
SEPARATION OF THE BALL JOINT COULD CAUSE A LOSS OF STEERING CONTROL INCREASING THE RISK OF A VEHICLE CRASH.
DEALERS WILL INSPECT THE BALL JOINT END HOUSING COVER SEAL FOR LEAKAGE WITH A HIGH PRESSURE AIR TESTER AND THE RUBBER BOOT WILL BE VISUALLY INSPECTED FOR DAMAGE. IF THE COVER SEAL LEAKS OR THE BOOT IS DAMAGED, THE LOWER CONTROL ARM WILL BE REPLACED.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 97V095000
Component: STRUCTURE:BODY:HOOD:HINGE AND ATTACHMENTS
Manufacturer: CHRYSLER GROUP LLC
Potential Number of Units Affected: 219000
Year: 1996
Make: Plymouth
Model: Breeze
Manufactured
from: 1996-03-30
to: 1997-04-15
Recall Date: 1997-06-06
For more information in regard to the factory and extended warranty options for the Breeze, please review the Plymouth Extended Warranty Information.
Summary:
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SECONDARY HOOD LATCH SPRING CAN DISENGAGE FROM ITS RETENTION HOLE IF THE HOOD IS SLAMMED SHUT.
IF THIS CONDITION OCCURS SIMULTANEOUSLY WITHOUT ENGAGING THE PRIMARY LATCH, THE HOOD WOULD NOT BE RESTRAINED INCREASING THE RISK OF A VEHICLE CRASH.
DEALERS WILL REPLACE THE SECONDARY HOOD LATCH SPRING WITH A LONGER END HOOK SPRING.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 96V075000
Component: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER
Manufacturer: CHRYSLER GROUP LLC
Potential Number of Units Affected: 151800
Year: 1996
Make: Plymouth
Model: Breeze
Manufactured
from: 1994-08-01
to: 1995-10-01
Recall Date: 1996-05-03
For more information in regard to the factory and extended warranty options for the Breeze, please review the Plymouth Extended Warranty Information.
Summary:
THE BRAKE MASTER CYLINDER CAN LEAK BRAKE FLUID DUE TO A DAMAGED DOUBLE LIP REAR PISTON SEAL.
BRAKE FLUID LEAKAGE CAN RESULT IN DIMINISHED EFFECTIVENESS OF ONE HALF OF THE SPLIT BRAKE SYSTEM. THE INSTRUMENT PANEL WARNING LIGHT(S) WILL SIGNAL SYSTEM IMPAIRMENT PRIOR TO PARTIAL BRAKE SYSTEM LOSS.
DEALERS WILL REPLACE THE REAR BRAKE MASTER CYLINDR PISTON ASSEMBLY.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 96V074000
Component: SERVICE BRAKES, HYDRAULIC:ANTILOCK
Manufacturer: CHRYSLER GROUP LLC
Potential Number of Units Affected: 90000
Year: 1996
Make: Plymouth
Model: Breeze
Manufactured
from: 1994-08-01
to: 1995-08-30
Recall Date: 1996-05-02
For more information in regard to the factory and extended warranty options for the Breeze, please review the Plymouth Extended Warranty Information.
Summary:
CORROSION OF THE ABS HYDRAULIC CONTROL UNIT CAN CAUSE THE SOLENOID VALVES TO STICK IN THE OPEN POSITION.
IF EITHER FRONT WHEEL VALVE STICKS, THE VEHICLE WOULD SWERVE FROM A STRAIGHT STOP WHEN THE BRAKES ARE APPLIED.
DEALERS WILL INSTALL A PLATE AND SILICONE GREASE INJECTED INTO THE SOLENOID CAVITY TO ELIMINATE THE POTENTIAL FOR THIS CONDITION.
|
This website is independently owned by One Common Drive, LLC. and is not affiliated, endorsed, or sponsored by Nissan North America, Inc. or Nissan Extended Services North America.
|
|
|
