 |
|
Home - Resources
- Nissan Recalls
- 1990
1990 Nissan Recall Lookup
Many vehicles have Nissan "factory-authorized" recalls where repairs can be completed at no charge
to the customer. Check to see if your vehicle has any outstanding recalls, and schedule a
service appointment to see if you qualify for a FREE repair.
If you would like to check on any Recall Notices for your vehicle, please enter the appropriate
year and model.
1990 Porsche Recalls
|
|
|
|
NHTSA CAMPAIGN ID Number: 96V147000
Component: STEERING:WHEEL AND HANDLE BAR
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 12538
Year: 1990
Make: Porsche
Model: Carrera
Manufactured
from: 1988-04-01
to: 1992-07-30
Recall Date: 1996-08-08
For more information in regard to the factory and extended warranty options for the Carrera, please review the Porsche Extended Warranty Information.
Summary:
A PART OF THE STEERING COLUMN UPPER UNIVERSAL JOINT CRACKED DURING THE MANUFACTURING PROCESS.
THIS CONDITION COULD RESULT IN NOISE AND FREE PLAY IN THE STEERING SYSTEM AND IF LEFT UNCORRECTED, WILL RESULT IN LOSS OF STEERING CONTROL.
DEALERS WILL INSPECT THE UNIVERSAL JOINT FOR CRACKS AND WILL REPLACE CRACKED JOINTS WITH NEW PARTS.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 96V147000
Component: STEERING:WHEEL AND HANDLE BAR
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 12538
Year: 1990
Make: Porsche
Model: 911
Manufactured
from: 1988-04-01
to: 1992-07-30
Recall Date: 1996-08-08
For more information in regard to the factory and extended warranty options for the 911, please review the Porsche Extended Warranty Information.
Summary:
A PART OF THE STEERING COLUMN UPPER UNIVERSAL JOINT CRACKED DURING THE MANUFACTURING PROCESS.
THIS CONDITION COULD RESULT IN NOISE AND FREE PLAY IN THE STEERING SYSTEM AND IF LEFT UNCORRECTED, WILL RESULT IN LOSS OF STEERING CONTROL.
DEALERS WILL INSPECT THE UNIVERSAL JOINT FOR CRACKS AND WILL REPLACE CRACKED JOINTS WITH NEW PARTS.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 93V204000
Component: ELECTRICAL SYSTEM:FUSES AND CIRCUIT BREAKERS
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 11346
Year: 1990
Make: Porsche
Model: 911
Manufactured
from: 1988-04-01
to: 1992-01-01
Recall Date: 1993-12-07
For more information in regard to the factory and extended warranty options for the 911, please review the Porsche Extended Warranty Information.
Summary:
AFTER THE ENGINE HAS BEEN TURNED OFF, THE REAR HEATER WILL AUTOMATICALLY OPERATE IN ORDER TO DISSIPATE HEAT IN THE ENGINE HEATING SYSTEM. DURING THIS OPERATION, THE RESISTOR FOR THE REAR HEATER BLOWER CAN BECOME OVERLOADED DUE TO A BINDING OR SEIZED REAR HEATER BLOWER.
THE OVERLOADED RESISTOR CAN CREATE HEAT SUFFICIENT TOIGNITE THE PLASTIC AIR PIPE TO WHICH IT IS CONNECTED, RESULTING IN AN ENGINECOMPARTMENT FIRE.
PORSCHE DEALERS WILL INSTALL A NEW RESISTOR CONTAINING A CIRCUIT BREAKER.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 93V204000
Component: ELECTRICAL SYSTEM:FUSES AND CIRCUIT BREAKERS
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 11346
Year: 1990
Make: Porsche
Model: Carrera
Manufactured
from: 1988-04-01
to: 1992-01-01
Recall Date: 1993-12-07
For more information in regard to the factory and extended warranty options for the Carrera, please review the Porsche Extended Warranty Information.
Summary:
AFTER THE ENGINE HAS BEEN TURNED OFF, THE REAR HEATER WILL AUTOMATICALLY OPERATE IN ORDER TO DISSIPATE HEAT IN THE ENGINE HEATING SYSTEM. DURING THIS OPERATION, THE RESISTOR FOR THE REAR HEATER BLOWER CAN BECOME OVERLOADED DUE TO A BINDING OR SEIZED REAR HEATER BLOWER.
THE OVERLOADED RESISTOR CAN CREATE HEAT SUFFICIENT TOIGNITE THE PLASTIC AIR PIPE TO WHICH IT IS CONNECTED, RESULTING IN AN ENGINECOMPARTMENT FIRE.
PORSCHE DEALERS WILL INSTALL A NEW RESISTOR CONTAINING A CIRCUIT BREAKER.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 92V142000
Component: VEHICLE SPEED CONTROL
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 11091
Year: 1990
Make: Porsche
Model: 911
Manufactured
from: 1988-04-01
to: 1992-01-01
Recall Date: 1992-10-05
For more information in regard to the factory and extended warranty options for the 911, please review the Porsche Extended Warranty Information.
Summary:
THE BALL SOCKETS ON THE CRUISE CONTROL LINKAGE CAN BREAK, ALLOWING THE CRUISE CONTROL LINKAGE TO BECOME DETACHED ON ONE END AND JAM ON NEARBY COMPONENTS, WHICH COULD IMPAIR THROTTLE PLATE OPERATION.
IMPAIRED THROTTLE PLATE OPERATION COULD PREVENT THEENGINE FROM RETURNING TO IDLE, RESULTING IN UNWANTED ENGINE SPEED AND POSSIBLEVEHICLE ACCIDENT.
REPLACE THE CURRENT PLASTIC BALL SOCKETS WITH A NEW LINKAGE USING STEEL BALL SOCKETS, AND LUBRICATE THE CRUISE CONTROL RELAY LEVER. OWNERS ARE ADVISED NOT TO USE THE CRUISE CONTROL UNTIL THE MODIFICATION IS INSTALLED.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 91V012000
Component: LATCHES/LOCKS/LINKAGES:HOOD:LATCH
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 2451
Year: 1990
Make: Porsche
Model: Carrera 2
Manufactured
from: 1988-04-01
to: 1989-12-01
Recall Date: 1991-01-15
For more information in regard to the factory and extended warranty options for the Carrera 2, please review the Porsche Extended Warranty Information.
Summary:
LUGGAGE IN THE LUGGAGE COMPARTMENT AND OR PLASTIC TRIM SURROUNDING THE SAFETY LATCH MAY PREVENT THE LATCH ON THE FRONT HOOD FROM PROPERLY LOCKING.
LATCH FAILURE COULD CAUSE HOOD TO OPEN AND OBSTRUCT THEDRIVER'S FRONT VIEW WHICH COULD RESULT IN AN ACCIDENT.
REPLACE PLASTIC TRIM PIECE AND INSTALL A BRACKET BEHIND THE SAFETY LATCH TO PREVENT INTERFERENCE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 91V012000
Component: LATCHES/LOCKS/LINKAGES:HOOD:LATCH
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 2451
Year: 1990
Make: Porsche
Model: Carrera 4
Manufactured
from: 1988-04-01
to: 1989-12-01
Recall Date: 1991-01-15
For more information in regard to the factory and extended warranty options for the Carrera 4, please review the Porsche Extended Warranty Information.
Summary:
LUGGAGE IN THE LUGGAGE COMPARTMENT AND OR PLASTIC TRIM SURROUNDING THE SAFETY LATCH MAY PREVENT THE LATCH ON THE FRONT HOOD FROM PROPERLY LOCKING.
LATCH FAILURE COULD CAUSE HOOD TO OPEN AND OBSTRUCT THEDRIVER'S FRONT VIEW WHICH COULD RESULT IN AN ACCIDENT.
REPLACE PLASTIC TRIM PIECE AND INSTALL A BRACKET BEHIND THE SAFETY LATCH TO PREVENT INTERFERENCE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 91V012000
Component: LATCHES/LOCKS/LINKAGES:HOOD:LATCH
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 2451
Year: 1990
Make: Porsche
Model: Targa
Manufactured
from: 1988-04-01
to: 1989-12-01
Recall Date: 1991-01-15
For more information in regard to the factory and extended warranty options for the Targa, please review the Porsche Extended Warranty Information.
Summary:
LUGGAGE IN THE LUGGAGE COMPARTMENT AND OR PLASTIC TRIM SURROUNDING THE SAFETY LATCH MAY PREVENT THE LATCH ON THE FRONT HOOD FROM PROPERLY LOCKING.
LATCH FAILURE COULD CAUSE HOOD TO OPEN AND OBSTRUCT THEDRIVER'S FRONT VIEW WHICH COULD RESULT IN AN ACCIDENT.
REPLACE PLASTIC TRIM PIECE AND INSTALL A BRACKET BEHIND THE SAFETY LATCH TO PREVENT INTERFERENCE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 91V012000
Component: LATCHES/LOCKS/LINKAGES:HOOD:LATCH
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 2451
Year: 1990
Make: Porsche
Model: 911
Manufactured
from: 1988-04-01
to: 1989-12-01
Recall Date: 1991-01-15
For more information in regard to the factory and extended warranty options for the 911, please review the Porsche Extended Warranty Information.
Summary:
LUGGAGE IN THE LUGGAGE COMPARTMENT AND OR PLASTIC TRIM SURROUNDING THE SAFETY LATCH MAY PREVENT THE LATCH ON THE FRONT HOOD FROM PROPERLY LOCKING.
LATCH FAILURE COULD CAUSE HOOD TO OPEN AND OBSTRUCT THEDRIVER'S FRONT VIEW WHICH COULD RESULT IN AN ACCIDENT.
REPLACE PLASTIC TRIM PIECE AND INSTALL A BRACKET BEHIND THE SAFETY LATCH TO PREVENT INTERFERENCE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 91V012000
Component: LATCHES/LOCKS/LINKAGES:HOOD:LATCH
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 2451
Year: 1990
Make: Porsche
Model: Cabrio
Manufactured
from: 1988-04-01
to: 1989-12-01
Recall Date: 1991-01-15
For more information in regard to the factory and extended warranty options for the Cabrio, please review the Porsche Extended Warranty Information.
Summary:
LUGGAGE IN THE LUGGAGE COMPARTMENT AND OR PLASTIC TRIM SURROUNDING THE SAFETY LATCH MAY PREVENT THE LATCH ON THE FRONT HOOD FROM PROPERLY LOCKING.
LATCH FAILURE COULD CAUSE HOOD TO OPEN AND OBSTRUCT THEDRIVER'S FRONT VIEW WHICH COULD RESULT IN AN ACCIDENT.
REPLACE PLASTIC TRIM PIECE AND INSTALL A BRACKET BEHIND THE SAFETY LATCH TO PREVENT INTERFERENCE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 91V012000
Component: LATCHES/LOCKS/LINKAGES:HOOD:LATCH
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 2451
Year: 1990
Make: Porsche
Model: Coupe
Manufactured
from: 1988-04-01
to: 1989-12-01
Recall Date: 1991-01-15
For more information in regard to the factory and extended warranty options for the Coupe, please review the Porsche Extended Warranty Information.
Summary:
LUGGAGE IN THE LUGGAGE COMPARTMENT AND OR PLASTIC TRIM SURROUNDING THE SAFETY LATCH MAY PREVENT THE LATCH ON THE FRONT HOOD FROM PROPERLY LOCKING.
LATCH FAILURE COULD CAUSE HOOD TO OPEN AND OBSTRUCT THEDRIVER'S FRONT VIEW WHICH COULD RESULT IN AN ACCIDENT.
REPLACE PLASTIC TRIM PIECE AND INSTALL A BRACKET BEHIND THE SAFETY LATCH TO PREVENT INTERFERENCE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 90V117000
Component: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 19
Year: 1990
Make: Porsche
Model: 928
Manufactured
from: 1990-02-01
to: 1990-02-01
Recall Date: 1990-06-12
For more information in regard to the factory and extended warranty options for the 928, please review the Porsche Extended Warranty Information.
Summary:
PLASTIC FUEL GAUGE MOUNTING NUT MAY CRACK AND ALLOW FUEL TO LEAK FROM THE FUEL TANK.
IF FUEL COMES INTO CONTACT WITH A HOT EXHAUST SYSTEM OROTHER IGNITION SOURCE, IT COULD RESULT IN A FIRE.
REPLACE MOUNTING NUTS WITH NUTS OF AN IMPROVED MATERIAL.
|
This website is independently owned by One Common Drive, LLC. and is not affiliated, endorsed, or sponsored by Nissan North America, Inc. or Nissan Extended Services North America.
|
|
|
