 |
|
Home - Resources
- Nissan Recalls
- 1991
1991 Nissan Recall Lookup
Many vehicles have Nissan "factory-authorized" recalls where repairs can be completed at no charge
to the customer. Check to see if your vehicle has any outstanding recalls, and schedule a
service appointment to see if you qualify for a FREE repair.
If you would like to check on any Recall Notices for your vehicle, please enter the appropriate
year and model.
1991 Porsche Recalls
|
|
|
|
NHTSA CAMPAIGN ID Number: 96V147000
Component: STEERING:WHEEL AND HANDLE BAR
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 12538
Year: 1991
Make: Porsche
Model: Carrera
Manufactured
from: 1988-04-01
to: 1992-07-30
Recall Date: 1996-08-08
Summary:
A PART OF THE STEERING COLUMN UPPER UNIVERSAL JOINT CRACKED DURING THE MANUFACTURING PROCESS.
THIS CONDITION COULD RESULT IN NOISE AND FREE PLAY IN THE STEERING SYSTEM AND IF LEFT UNCORRECTED, WILL RESULT IN LOSS OF STEERING CONTROL.
DEALERS WILL INSPECT THE UNIVERSAL JOINT FOR CRACKS AND WILL REPLACE CRACKED JOINTS WITH NEW PARTS.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 96V147000
Component: STEERING:WHEEL AND HANDLE BAR
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 12538
Year: 1991
Make: Porsche
Model: 911
Manufactured
from: 1988-04-01
to: 1992-07-30
Recall Date: 1996-08-08
Summary:
A PART OF THE STEERING COLUMN UPPER UNIVERSAL JOINT CRACKED DURING THE MANUFACTURING PROCESS.
THIS CONDITION COULD RESULT IN NOISE AND FREE PLAY IN THE STEERING SYSTEM AND IF LEFT UNCORRECTED, WILL RESULT IN LOSS OF STEERING CONTROL.
DEALERS WILL INSPECT THE UNIVERSAL JOINT FOR CRACKS AND WILL REPLACE CRACKED JOINTS WITH NEW PARTS.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 94V088000
Component: VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 1178
Year: 1991
Make: Porsche
Model: 944
Manufactured
from: 1990-07-01
to: 1991-11-01
Recall Date: 1994-05-06
Summary:
THE PLASTIC COWL COVER WAS NOT SEALED TO THE BODY AT THE BASE OF THE WINDSHIELD. WATER CAN LEAK AND REACH THE WINDSHIELD WIPER MOTOR, CAUSING INTERNAL CORROSION AND FAILURE OF THE WIPER MOTOR.
FAILURE OF THE WIPER MOTOR RESULTS IN REDUCED DRIVER VISIBILITY IN INCLEMENT WEATHER AND COULD RESULT IN AN ACCIDENT.
DEALERS WILL INSTALL A NEW WIPER MOTOR COVER.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 94V088000
Component: VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 1178
Year: 1991
Make: Porsche
Model: 968
Manufactured
from: 1990-07-01
to: 1991-11-01
Recall Date: 1994-05-06
Summary:
THE PLASTIC COWL COVER WAS NOT SEALED TO THE BODY AT THE BASE OF THE WINDSHIELD. WATER CAN LEAK AND REACH THE WINDSHIELD WIPER MOTOR, CAUSING INTERNAL CORROSION AND FAILURE OF THE WIPER MOTOR.
FAILURE OF THE WIPER MOTOR RESULTS IN REDUCED DRIVER VISIBILITY IN INCLEMENT WEATHER AND COULD RESULT IN AN ACCIDENT.
DEALERS WILL INSTALL A NEW WIPER MOTOR COVER.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 93V205000
Component: SERVICE BRAKES, HYDRAULIC:POWER ASSIST:VACUUM:HOSES, LINES/PIPING, AND FITTINGS
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 1149
Year: 1991
Make: Porsche
Model: 911
Manufactured
from: 1990-07-01
to: 1992-10-01
Recall Date: 1993-12-07
Summary:
THE HYDRAULIC BRAKE PRESSURE REDUCTION VALVE CAUSES THE RATE OF HYDRAULIC PRESSURE REDUCTION TO SLOW DOWN, WHICH MAY RESULT IN THE REAR WHEELS LOCKING-UP EVEN WITH THE ANTI-LOCK BRAKE SYSTEM IN OPERATION.
REAR WHEEL LOCK-UP MAY RESULT IN LOSS OF VEHICLECONTROL AND AN ACCIDENT.
PORSCHE DEALERS WILL INSTALL A MODIFIED HYDRAULIC BRAKE PRESSURE REDUCTION VALVE.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 93V204000
Component: ELECTRICAL SYSTEM:FUSES AND CIRCUIT BREAKERS
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 11346
Year: 1991
Make: Porsche
Model: 911
Manufactured
from: 1988-04-01
to: 1992-01-01
Recall Date: 1993-12-07
Summary:
AFTER THE ENGINE HAS BEEN TURNED OFF, THE REAR HEATER WILL AUTOMATICALLY OPERATE IN ORDER TO DISSIPATE HEAT IN THE ENGINE HEATING SYSTEM. DURING THIS OPERATION, THE RESISTOR FOR THE REAR HEATER BLOWER CAN BECOME OVERLOADED DUE TO A BINDING OR SEIZED REAR HEATER BLOWER.
THE OVERLOADED RESISTOR CAN CREATE HEAT SUFFICIENT TOIGNITE THE PLASTIC AIR PIPE TO WHICH IT IS CONNECTED, RESULTING IN AN ENGINECOMPARTMENT FIRE.
PORSCHE DEALERS WILL INSTALL A NEW RESISTOR CONTAINING A CIRCUIT BREAKER.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 93V204000
Component: ELECTRICAL SYSTEM:FUSES AND CIRCUIT BREAKERS
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 11346
Year: 1991
Make: Porsche
Model: Carrera
Manufactured
from: 1988-04-01
to: 1992-01-01
Recall Date: 1993-12-07
Summary:
AFTER THE ENGINE HAS BEEN TURNED OFF, THE REAR HEATER WILL AUTOMATICALLY OPERATE IN ORDER TO DISSIPATE HEAT IN THE ENGINE HEATING SYSTEM. DURING THIS OPERATION, THE RESISTOR FOR THE REAR HEATER BLOWER CAN BECOME OVERLOADED DUE TO A BINDING OR SEIZED REAR HEATER BLOWER.
THE OVERLOADED RESISTOR CAN CREATE HEAT SUFFICIENT TOIGNITE THE PLASTIC AIR PIPE TO WHICH IT IS CONNECTED, RESULTING IN AN ENGINECOMPARTMENT FIRE.
PORSCHE DEALERS WILL INSTALL A NEW RESISTOR CONTAINING A CIRCUIT BREAKER.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 92V142000
Component: VEHICLE SPEED CONTROL
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 11091
Year: 1991
Make: Porsche
Model: 911
Manufactured
from: 1988-04-01
to: 1992-01-01
Recall Date: 1992-10-05
Summary:
THE BALL SOCKETS ON THE CRUISE CONTROL LINKAGE CAN BREAK, ALLOWING THE CRUISE CONTROL LINKAGE TO BECOME DETACHED ON ONE END AND JAM ON NEARBY COMPONENTS, WHICH COULD IMPAIR THROTTLE PLATE OPERATION.
IMPAIRED THROTTLE PLATE OPERATION COULD PREVENT THEENGINE FROM RETURNING TO IDLE, RESULTING IN UNWANTED ENGINE SPEED AND POSSIBLEVEHICLE ACCIDENT.
REPLACE THE CURRENT PLASTIC BALL SOCKETS WITH A NEW LINKAGE USING STEEL BALL SOCKETS, AND LUBRICATE THE CRUISE CONTROL RELAY LEVER. OWNERS ARE ADVISED NOT TO USE THE CRUISE CONTROL UNTIL THE MODIFICATION IS INSTALLED.
|
|
|
|
|
NHTSA CAMPAIGN ID Number: 92V092000
Component: POWER TRAIN:AUTOMATIC TRANSMISSION
Manufacturer: PORSCHE CARS NORTH AMERICA, INC.
Potential Number of Units Affected: 145
Year: 1991
Make: Porsche
Model: 928
Manufactured
from: 1991-01-01
to: 1991-07-01
Recall Date: 1992-08-03
Summary:
A PLASTIC FILLER PIECE LOCATED IN THE AUTOMATIC TRANSMISSION WAS INSTALLED WITHOUT SUFFICIENT SUPPORT. THIS FILLER PIECE CAN MOVE BECAUSE OF THE HYDRAULIC PRESSURE IN THE SYSTEM, AND NOT ALLOW THE AUTOMATIC TRANSMISSION TO KICK DOWN TO A LOWER GEAR.
IF THE ACCELERATOR PEDAL IS PUSHED INTO THE KICK-DOWNPOSITION, THE EXPECTED ACCELERATION OF THE VEHICLE MAY NOT OCCUR DUE TOINTERFERENCE OF THE FILLER PIECE. THIS COULD RESULT IN AN ACCIDENT DURING AVEHICLE PASSING MANUEVER.
DEALERS WILL INSTALL A NEW FILLER PIECE WHICH HAS A SECURING BRACE TO PREVENT MOVEMENT.
|
This website is independently owned by One Common Drive, LLC. and is not affiliated, endorsed, or sponsored by Nissan North America, Inc. or Nissan Extended Services North America.
|
|
|
